Dimensions: (L x W x H) & Weight
(Base heights vary slightly based on type of cup used)
Desktop Base: 23.1 cm x 12.7 cm x 4 cm (9.10 in x 5.0 in x 1.58 in); 541.5 g (19.1 oz)
Dual Base: 23.1 cm x 12.7 cm x 4 cm (9.10 in x 5.0 in x 1.58 in);
Weight: 553 g (18.8 oz) or 654.9 g (23.1 oz) with Ethernet
Quad Base: 44.45 cm x 12.7 cm x 4 cm (17.5 in x 5.0 in x 1.58 in);
Weight: 1,156.7 g (40.8 oz) or 1,275.7 g (45 oz) with Ethernet
A base with cups installed will range from 6.4 cm to 11.4 cm height (2.5 in to 4.5 in).
Power Supply (Dual/Desktop Base): 13 cm x 7.6 cm x 3.3 cm (5.1 in x 3.0 in x 1.3 in); 272.2 g (9.6 oz)
Power Supply (Quad Base): 18 cm x 5.8 cm x 3.9 cm (7.09 in x 2.27 in x 1.52 in); 688.9 g (24.3 oz)
Computer cups and battery cups are 10.6 cm long x 12.5 cm wide (4.18 in x 4.94 in) and have a total height from 4.8 cm to 10.2 cm (1.9 in to 4.0 in); Weight ranges from 90.7 g to 124.8 g (3.2 oz to 4.4 oz).

Certifications:
Safety: cULus Listed (pending), DEMKO (pending)
EMC: Class B - FCC/ICES/EN (Desktop Base; Dual-Base and Quad-Base Charge-only configurations); Class A - FCC/IC/EN (Dual-Base and Quad-Base Ethernet configurations)
Environmental Rating: EU Directives-WEEE, RoHS, Packaging and Waste Packaging

Power
Recharging Time: Typically less than 4 hours; maximum 6 hours for fully discharged packs.

Accessories
Communications and Charging Dock:
Cups – Mobile Computer: Accommodates one mobile computer; provides charging and data communication connectivity status; front-mounted Ethernet-connectivity indicator (used where applicable)
Cups – Mobile Printer: Accommodates one mobile printer; provides charging connectivity status
Cups – Computer or Printer Battery Pack: Accommodates up to two battery packs; provides charging; front-mounted Charge Status indicator for each pack.

Adapters:
Mounting Options – Rack Mounting Kit: Shelf for mounting one Quad Base, with Power Supply Shelf underneath. Options for mounting horizontal; adapters for 15-degree upward or downward angle mounting.

Ethernet:
Dual and Quad Base: Optional Ethernet 100Base-T Switch; RJ45 Uplink and Downlink ports
Desktop Base: USB 2.0 Full Speed, Standard USB-A Host port, Micro USB-B Client port; Desktop Base accepts optional Ethernet 100Base-T or 56 Kbps Analog Modem modules via USB Host port

Contact your Intermec PartnerNet Reseller or Sales Representative for full information on available configurations.